Trox Technik VARYCONTROL LVC, Руководство по установке и пусконаладке

Страница: 14 / 36

3.2 Detection of the control compo-
nents
The attached control component can be identified on
the adjustment label of the VAV terminal unit, see
marking Fig. 1 and Fig. 2.
Possible combinations of VAV controller and control
component Ä Chapter 10 ‘Control component/attach-
ments’ on page 31
Fig. 1: Calibration sticker variant 1
Fig. 2: Calibration sticker variant 2
3.3 Position of the damper blade
The position of the damper blade corresponds to the
mark on the axis and is thus recognisable from the out-
side.
Fig. 3: Actuators with positive locking
1 Shaft with marking for position indication
2 Damper blade
Fig. 4: Actuator with traction
1 Shaft with marking for position indication
2 Damper blade
Fig. 5: Actuator on TVE
1 Shaft with marking for position indication
2 Damper blade
Product description
Position of the damper blade
VAV terminal units VARYCONTROL 14