BE-LCD-01 Operating and Installation Manual / Leaflet no. M375EV8 (01/2015)
24
EasyConnect configuration software
EasyConnect-CAB (TROX part no. B588NF4) for
wire-based configuration, consisting of:
• Software licence
• USB RS485 adapter
• Configuration cable
EasyConnect-BC (TROX part no. B588NF5) for
wireless configuration, consisting of:
• Software licence
• Bluetooth adapter module BlueCON
Connection socket for service and
commissioning
For configuration, maintenance, and diagnosis,
connect a notebook to the connection socket of the
control panel using the configuration cable and
adapter.
Commissioning
The EasyConnect configuration software provides a
commissioning wizard that guides users in making
project-specific adjustments.
• Optical alarm, red, either blinking or permanent
• Duration of the acoustic alarm
• Type of acoustic alarm in case the sash is opened
beyond the maximum operational sash opening
• Enabling the function button for
“Increased Operation”
• Enabling the function button for
“Reduced operation”
• Enabling the function button for shut-off
• Enabling the function button for fume cupboard
lighting
• Enabling the function button for manual control
• Enabling the display for face velocity (only for
fume cupboard control)
Maintenance
The EASYLAB control panel is maintenance-free.
Use only mild cleaning agents to clean the front
plastic.
Connection socket
7 Commissioning
8 Maintenance
The functions of the control panel are
configurable. The control panel is factory set to
allow essential functions for fume cupboard and
room control (basic setting).
If two control panels are connected, the same
configuration applies to both units.
The EasyConnect configuration software can be
used to change and expand the range of
functions.
Enabling the room control panel when room management
control is active
Configuring the room control panel