EN
10
Operating manual – gas heater fan TGH 10 E / TGH 15 E / TGH 30 E
2
TGH 30 E
ð
The on/off switch (2) will be illuminated in red.
3. Leave the fan running for approx. 30 s.
4. Press and hold the push button for the gas valve (3) while
actuating the ignition button (6).
3
6
TGH 10 E / TGH 15 E
3
6
TGH 30 E
5. It may be necessary to actuate the ignition button (6)
repeatedly before the gas catches fire.
6. Hold onto the gas valve push button (3) for roughly another
10 s after the ignition has been successful.
10sec
TGH 10 E / TGH 15 E
10sec
TGH 30 E
7. Then let go of the button (3).
ð
The combustion itself is an automatically controlled
process.
Info
Excessive temperature trips the overheating protection
which in turn interrupts the gas supply.
If the flame dies, the flame failure protection kicks in
which also interrupts the gas supply.
If the device switches off upon releasing the gas valve push
button (3), please proceed as follows:
1. Keep the fan running for approx. 1 minute to let the gas
escape completely.
2. Repeat the ignition process as described above.
