4
EN
fan heater TFC 1 E / TFC 2 E
Symbols on the device
Symbols
Meaning
The inscription on the device indicates that it is
prohibited to place objects (such as towels,
clothes etc.) above or directly in front of the
device.
In order to avoid overheating and fire hazards, the
heater must not be covered.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning
Improper handling entails a risk of burning and electric
shock.
Only use the device as intended!
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
Improper installation entails a risk of fire.
Do not place the device on combustible ground.
Do not place the device on high-pile carpets.
Warning
In order to avoid overheating and fire hazards, the
device must not be covered!
Behaviour in the event of an emergency
1. Switch off the device.
2. In an emergency, disconnect the device from the mains
feed-in: Unplug the device from the mains socket.
3. Do not reconnect a defective device to the mains.
Overheating protection
The device is provided with a safety thermostat, which is
activated by overheating of the device (when exceeding the
operating temperature).
Once the safety thermostat has switched itself on, the heating
will be turned off. The fan keeps running.
When the device has cooled down sufficiently, the heating will
be switched back on.
Investigate the cause of overheating.
If the fan heater has been switched off by the overheating
protection, you have to set the switch to
0
and pull the plug.
Allow the fan heater to cool down, eliminate the cause of
overheating, and switch the fan heater back on. If the problem
persists or if you cannot find the cause of overheating, switch
the fan heater off immediately and pull the plug. Please contact
the customer service in this case.
Information about the device
Device description
The socket fan heater serves to generate and distribute warm
air, e.g. in interior spaces. The device generates heat by means
of a ceramic heating element.
The air surrounding the ceramic heating element is heated. The
heated air is blown into the room by a fan. The device is further
equipped with an overheating protection.
The device TFC 1 E is available in white and the device TFC 2 E
is available in black.
