EN
5
fan heater TFC 1 E / TFC 2 E
Device depiction
1
2
3
4
5
6
3
7
3
No.
Designation
1
Main switch
2
Air inlet
3
Air outlet
4
PTC element
5
Control panel
6
Mains plug
7
Operating control lamp
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Switch the device off.
•
Remove the mains plug from the mains socket.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, proceed as follows:
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
Assembly and installation
Scope of delivery
•
1 x Device
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Make sure that the mains plug is not damaged.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
