4
EN
spot cooling air conditioning unit PT 2700 SP
Foreseeable misuse
• Do not place the device on wet or flooded ground.
• Do not place any objects, e.g. clothing, on the device.
• Do not use the device out of doors.
• Do not use the device in wet rooms (e.g. bathrooms or
laundry rooms).
• Never immerse the device in water.
• Do not make any unauthorised modifications, alterations or
structural changes to the device.
• Any use other than the intended use is regarded as a
reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with
electric devices in damp areas.
• have read and understood the instructions, especially the
Safety chapter.
Maintenance tasks which require the housing to be opened
must only be carried out by specialist companies for cooling and
air-conditioning or by Trotec.
Electrically skilled person
Electrically skilled personnel must be able to read and
understand electric circuit diagrams, to put electrical systems
into service and to maintain them, to wire control cabinets, to
ensure the functionality of electrical components and to identify
possible hazards from electrical and electronic systems.
Safety signs and labels on the device
Note
Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.
The following safety signs and labels are attached to the device:
WARNING • WARNUNG • ATTENTION
Follow the manual
This symbol indicates that the operating manual must
be observed.
Follow the repair manual
Disposal, maintenance and repair work of the
refrigerant circuit may only be carried out in
accordance with the manufacturer's specifications and
by persons having a certificate of qualification. A
corresponding repair manual is available from the
manufacturer upon request.
The following labels are attached to the device in German and
English.
Warnings
Make sure that no objects fall into the hot air inlet or the
cooling air duct. Any foreign object will cause damage to the
fan blades or potential blockage of the air current and is not
covered by guarantee.
Warnings
Do not reach into the flexible air duct when adjusting the air
angle for cold air. Adjust the angle by moving the plastic cover.
Important
Regularly check the filter for dirt!
Excessive dust and dirt on the filter will affect the air supply
and cause the heat exchanger to ice up. This leads to a drastic
reduction of the cooling capacity.
Attention
There are combustible gases inside the device. It is prohibited
to disassemble or repair the device by non-qualified personnel!
Warnings
Switch off the device when the
condensation tank full
indication is displayed. Remove the condensation tank and
empty it. Make sure that the condensation tank is inserted
correctly before switching the device back on.