Trotec PCSS 15-20V Скачать руководство пользователя страница 4

4

EN

cordless portable circular saw PCSS 10-20V

Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools.

 Such preventive

safety measures reduce the risk of starting the power tool
accidentally.

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.

 Power

tools are dangerous in the hands of untrained users.

Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use.

 Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean.

 Properly maintained

cutting tools with sharp cutting edges are less likely to
bind and are easier to control.

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

Keep handles and grasping surfaces dry, clean and
free from oil and grease.

 Slippery handles and grasping

surfaces do not allow for safe handling and control of the
tool in unexpected situations.

General Power Tool Safety Warnings – Battery tool
use and care

Recharge only with charger specified by the
manufacturer.

 A charger that is suitable for one type of

battery pack may create a risk of fire when used with
another battery pack.

Use power tools only with specifically designed battery
packs.

 Use of any other battery packs may create a risk of

injury and fire.

When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another.

 Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.

 Liquid ejected from the

battery may cause irritation or burns.

Do not use a battery pack or tool that is damaged or
modified.

 Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk
of injury.

Do not expose a battery pack or tool to fire or
excessive temperature.

 Exposure to fire or temperature

above 130 °C may cause explosion.

Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.

 Charging improperly or at

temperatures outsides the specified range may damage
the battery and increase the risk of fire.

General Power Tool Safety Warnings – Charger use
and care

This charger can be used by children aged
from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by
children without supervision.

Never insert non-rechargeable batteries into the
charger.

 A charger that is suitable for one type of battery

pack may create a risk of fire and explosion, when used
with another battery pack or non-rechargeable batteries.

Only charge the Li-Ion battery "Multiflex 20 –
2.0 DC" (capacity of 2.0 Ah = 5 battery cells) with the
charger "Multiflex 20 – 2.0 AC". The battery voltage must
match the battery charging voltage of the charger.

General Power Tool Safety Warnings – Service

Have your power tool serviced by a qualified repair
person using only identical replacement parts.

 This will

ensure that the safety of the power tool is maintained.

Never service damaged battery pack.

 Service of battery

packs should only be performed by the manufacturer or
authorized service providers.

Device-specific safety warnings for portable
circular saws

Содержание PCSS 15-20V

























Отзывы: