EN
17
cordless portable circular saw PCSS 10-20V
18. Press and hold the spindle lock (
1
).
28
1
19. Tighten the clamping screw (
20
) by means of the Allen
wrench (
28
).
20. Let go of the spindle lock (
1
).
21. Check whether the saw blade is properly locked in place.
22. Put the battery (
12
) back in.
Mounting and adjusting the rip fence
1. Loosen the wing screw (
17
) and insert the rip fence (
26
)
into the rip fence holder (
6
).
17
26
6
2. Set the desired distance from the cutting line to the edge
of the workpiece (cutting width) using the scale on the rip
fence (
26
) and the mark (
34
) on the base plate.
The figure below shows a 4 cm setting by way of example:
4 c
m
26
34
3. Retighten the wing screw (
17
).