EN
13
cordless portable circular saw PCSS 10-20V
Removing the battery
1. Detach the battery (
12
) from the device by pressing and
holding the unlocking button (
14
, I.) and pulling the battery
off the device (II.).
I.
II.
2. If required, charge the battery (
12
) as described in the
section
Charging the battery
.
Checking the battery charging status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication (
13
):
LED colour
Meaning
Green – Orange – Red
maximum charge / power
Orange – Red
medium charge / power
Red
weak charge – Recharge the
battery.
1. Press on the battery icon (
30
) on the battery (
12
).
ð
You can read the battery status from the battery level
indication (
13
).
30
13
Adjusting the cutting depth
In the 0° position, the cutting depth can be set in the range from
0 mm to
48
mm.
Info
The cutting depth should exceed the material thickness
by approx. 3 mm so that a little less than the total tooth
height is visible below the workpiece.
1. Unscrew the locking screw (
16
).
2. Set the desired cutting depth on the cutting depth
scale (
31
).
16
31
3. Retighten the locking screw (
16
).