EN
A - 2
Operating manual for LD6000 PTS
3.2 LD6000 PTS accessory case
1 . Disinfectant – 250 ml aerosol can
2 . Bluetooth headphones
3 . GEKA couplings 1 inch internal thread and 1 inch
external thread
4 . Spare 9 V battery
5 . Optional: LD6000 PTS Bluetooth receiver
6 . Charging adapters for 230 V socket and 12 V cigarette
lighter; mini USB charging cable
7 . Hose adapter
3.3 Optional accessories
1 . LD6000 combination detector
2 . LD6000 PTS Bluetooth receiver
3 . Water- and impact-proof Bluetooth speaker
4 . SeekTech SR20 and SeekTech ST510 (pipe detector and
transmitter)
04 Start-up and application
The LD6000 PTS transmitter unit is running on a customary
9 V battery . The Bluetooth headphones, Bluetooth speak-
er and Bluetooth receiver are provided with an integrated
rechargeable battery . Before start-up make sure that the
devices are charged or the battery has sufficient voltage .
Overview of the functions of the LD6000 PTS transmitter
unit .
LD6000 PTS
The functions of the
Multi-function button (5)
are described
below .
• If the button is pressed for approx . 3 seconds while
switched off, the transmitter unit switches on .
• If the button is pressed for approx . 6 seconds while
switched off, the last active Bluetooth connection will be
deleted . Simultaneously the device switches over into
pairing mode (search mode) .
• If the transmitter unit is switched on and a Bluetooth
connection is established, briefly pressing the button
activates the
"
mute
"
function (muting) . If the
"
MUTE
"
LED
is illuminated, sound transmission is active . If the LED is
not illuminated, the transmission is muted as well . The
level indicator is not affected by this .
• To switch the device off, press the button for approx . 3
seconds . All parts of the
"
Level LED
"
light up . The device
only fully switches off when letting go of the button .
The
Battery LED (2
)
indicates the battery's voltage condi-
tion . If the LED is constantly lit, the battery has sufficient
voltage . If it flashes slowly, the battery should soon be
changed . If it flashes quickly, the voltage is insufficient for
another measurement and the battery has to be changed
first .
The
Bluetooth LED (3)
indicates, whether there is a Blue-
tooth connection . If the LED is constantly lit, a connection
is established . If it flashes, the device is in pairing mode
(search mode) . If it is not illuminated, the connection is not
made and the transmitter unit will only reconnect (pair) with
the last active connection .
The
Level LED (4)
indicates the intensity of the recorded
sound . Please note that a leaking sound does not necessar-
ily cause a full-scale deflection of the Level LED . The Level
LED is only intended for orientation purposes .
2 .
1 .
3 .
4 .
5 .
7 .
6 .
1 .
1 .
2 .
3 .
4 .
5 .
6 .
1. 9 mm connectors
2. Battery LED
3. Bluetooth LED
4. Level LED
5. Multi-function button
6. "Mute" LED
