EN
5
radiant heater IR 1200 S
Information about the device
Device description
The device
IR 1200 S
is used to quickly generate instant heat.
The device is based on the functional principle of heat
generation by infrared radiation. Persons or objects are heated
directly.
The 2 heating levels of up to 1200 W can be set using the pull
switch with cord.
•
suitable for the application in roofed outdoor areas
•
splash-proof IP24
•
only suitable for wall mounting
•
adjustable angle
•
no dust circulation (suitable for allergy sufferers)
Device depiction
0
1
2
3
5
4
No.
Designation
1
Heating level indicator:
0 = off
1 = level 1 (600 W)
2 = level 2 (1200 W)
2
Pull switch with cord
3
Heating rods
4
Swivelling bracket
5
Bracket for wall mounting
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, proceed as follows:
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
