EN
7
radiant heater IR 1200 S
4. Loosen the screws from the holder of the device.
0
5. Remove the cover from the holder.
0
ð
You can see the hole in the holder as depicted in the
picture.
6. Position the device on the wall and attach it there.
7. Make sure that the device is attached securely.
8. Reattach the cover on the holder of the device.
9. Tilt the device to the desired angle. You can tilt the device
by up to 30° both to the top and to the bottom.
+ 30°
- 30°
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
