Trotec IDS 20D, Оригинальное руководство пользователя

Страница: 10 / 15

10 EN oil heater IDS 20 D / IDS 30 D
Operation
The device may only be used by accordingly instructed persons.
Operating elements
IDS 20 D
13
15
14
No. Designation
13 On/off switch
14 Power cable
15 Thermostat socket (optional for IDS 20 D)
IDS 30 D
18 14
16
17 15
No. Designation
14 Power supply cable
15 Thermostat socket
16 Selector switch
(continuous operation/thermostat operation)
17 Operating light
18 Reset button with indicator light
Switching the device on
IDS 20 D
The IDS 20 D comes with a heating level without thermostat and
without integrated thermostat socket. Without a thermostat
connected, the IDS 20 D can only be used in continuous
operation mode. Optionally, the device can be equipped with a
thermostat and a thermostat socket to additionally allow for
automatic operation.
Switch-on in continuous operation mode
1. Set the on/off switch (13) to position I .
2. The fan starts up and combustion starts after a few
seconds.
3. Ensure a successful ignition.
Switch-on in automatic operation mode (optional)
The device can only be operated in automatic operation mode if
an optional thermostat is connected to the optional thermostat
socket.
ü
The device is equipped with an optional thermostat socket.
ü
An optional thermostat is connected to the device.
1. Prepare the device for operation by setting the connected
thermostat.
2. Please note the instructions provided with the thermostat.
3. Set the on/off switch (13) to position
I .
IDS 30 D
The IDS 30 D comes with a heating level without thermostat and
an integrated thermostat socket. Without a thermostat
connected, the IDS 30 D can only be used in continuous
operation mode. Optionally, the device can be equipped with a
thermostat for the existing thermostat socket to additionally
allow for automatic operation.
Switch-on in continuous operation mode
1. Set the selector switch (16) to position I .
2. The fan starts up and combustion starts after a few
seconds.
3. Ensure a successful ignition.
Switch-on in automatic operation mode (optional)
The device can only be operated in automatic operation mode if
an optional thermostat is connected to the integrated thermostat
socket.
ü
An optional thermostat is connected to the device.
1. Prepare the device for operation by setting the connected
thermostat.
2. Please note the instructions provided with the thermostat.
3. Set the selector switch (16) to position
II .