8
EN
sound level measuring device controlled via smartphone BS30WP
Individual value measurement
Proceed as follows to select the individual value measurement
as measuring mode:
1. Press the
Menu
button (11) to open the context menu for
sensors.
2. Press the
X/T measurement
button (13) to switch from
continuous measurement to individual value measurement.
ð
Individual value measurement has been selected as
measuring mode.
ð
Return to the screen displaying the measured values.
ð
The first measured value is automatically determined
and displayed.
SENSORS
MEASUREMENTS
REPORTS
CUSTOMERS
SETTINGS
18
19
17
Refresh measured value
BS30WP
64,9 dbA
Sound level
[45,3 | 64,9] Ø 56,8
64,9 dbA
No. Designation
Meaning
17
Individual value
indication
Indicates the current sound level.
18 Numeric display
Indicates the minimum, maximum and
average values for the sound level as
well as the current value.
19
Refresh measured
value
button
Performs an individual value
measurement and refreshes the
displays (17) and (18).
Refreshing the measured value
Proceed as follows to refresh the measured values in the
individual value measurement mode:
1. Press the
Refresh measured value
button (19) on the
terminal device.
ð
The appSensor determines the current measured value
which is then displayed on the terminal device.
2. You can also press the
On / off / measurement
button (3)
on the appSensor.
ð
The appSensor determines the current measured value
which is then displayed on the terminal device.
Recording measured values
Proceed as follows to record measured values for later
evaluation:
1. Press the
Menu
button (11) or the free area below the
measured value display.
ð
The context menu for sensors opens.
2. Press the
Start recording
button (16).
ð
The
REC
button (20) replaces the
Menu
button (11).
3. If you perform a continuous measurement, the measured
values determined from then on will be recorded.
4. If you perform individual value measurements, repeatedly
press the
On / off / measurement
button (3) on the
appSensor or the
Refresh measured value
button (19) on
the terminal device until you have logged all the required
measured values.
SENSORS
MEASUREMENTS REPORTS
CUSTOMERS
SETTINGS
Reset min / max / Ø
X/T measurement
Disconnect sensor
Sensor settings
Stop recording
20
21
BS30WP
Sound level
[45,3 | 64,9] Ø 56,8
64,9 dbA
No. Designation
Meaning
20
REC
button
Opens the sensor settings menu.
21
Stop recording
button
Stops the current recording of
measured values.
Opens the submenu for saving
recordings.
Stopping a recording
Proceed as follows to stop recording the measured values:
1. Press the
REC
button (20).
ð
The context menu for sensors opens.
2. Press the
Stop recording
button (21).
ð
The context menu for saving the recording opens.
3. You can optionally save, discard or resume the
measurement.
