13
Operating Manual – Thermal Imaging Camera AC080V
EN
3. Touch a selected measuring spot for approx. one second;
then a submenu opens in which the selected measuring spot
can be individually configured as follows:
– Alarm: visual and acoustic alarm signal when falling below
(Below), exceeding (Above) or hitting (Equal) a set alarm
temperature precisely.
– Max: locates the hottest point in the image section
– Min: locates the coldest point in the image section
4. Press
Confirm
to confirm and save the selection.
If you do not want to save the change, press
Cancel
.
Area analysis
On the screen you can draw up to two rectangular or circular
areas respectively to carry out a separate area analysis within the
thermogram.
1. Press the button for rectangles (35) or circles (36).
2. Touch the starting point on the display and then stretch the
rectangle or circle to be analysed.
– The rectangle or circle appears on the screen. Displayed in
the top left corner of the screen is a panel indicating the
maximum, minimum and average measured values within
the area (
R
stands for rectangle,
C
for circle).
– To adjust the size or direction of the respective area, touch
one of the corners or the line and drag it to the desired
shape/size.
– To relocate an area in its entirety on the screen, touch its
centre and drag it to the desired position.
– The button for rectangles or circles will be enabled.
– The button is now displayed with a recycle bin (example:
rectangle (38)).
– In order to delete the point, drag it to the corresponding
button with the recycle bin.
38
Содержание AC080V
Страница 1: ...AC080V OPERATING MANUAL THERMAL IMAGING CAMERA EN TRT BA AC080V TC 001 EN...
Страница 22: ......
Страница 23: ......