Trotec 4610000005 Скачать руководство пользователя страница 4

4

EN

submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E

Before taking the device into operation, have the following
checked by an expert:

– earthing, neutral conductor and RCD must be

functioning properly and correspond to the national
regulations,

– electrical plug connections must be protected from

moisture.

Intended use

The device is only suited for draining, conveying and pumping
over the following media:

clear water

non-corrosive suds (e.g. leaking washing machine)

slightly chlorinated water

When doing so, the water must not contain any suspended
matter exceeding a maximum particle size of 5 mm.
The device is fully submersible (watertight encapsulation) and
can be immersed up to 7 m into the pumping medium.
The water temperature must not exceed 35 °C.
The device may temporarily be used for e.g.:

pumping out flooded basements

emptying tanks and containers

emptying pools provided that no persons are in the water
when it is pumped out

water withdrawal from wells and shafts

Foreseeable misuse

The device is not suitable for continuous operation 
(e.g. as recirculation pump for ponds).

The device is not suitable for use as a filter pump in
swimming pools and the like.

The device is not suitable as permanent, automatic
overflow protection of e.g. wells or fountains or for the
regulation of the groundwater level. Use a stationary waste
water pumping system for building and property drainage
for these purposes.

The device is not suitable for increasing the pressure of
existing water supply networks.

The device is not suitable for pumping potable water.

The device must not be used for aggressive, abrasive,
caustic, corrosive, combustible or explosive pumping
media, e.g.:

– brine
– sandy water
– food
– cleaning agents
– fuels (e.g. petrol, diesel)
– oils
– greases
– petroleum
– nitro-cellulose thinner
– waste water from lavatories and urinal installations

The device must not be used at freezing temperatures.

Any unauthorised modifications, alterations or structural
changes to the device are forbidden.

Any use other than the intended use is regarded as a
reasonably foreseeable misuse.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
electric devices in damp areas.

have read and understood the operating manual, especially
the Safety chapter.

Содержание 4610000005

















Отзывы: