Trotec 3510006031, Руководство по эксплуатации

Страница: 8 / 17

8 EN pyrometer controlled via smartphone BP21WP
Individual value measurement
When the appSensor has been successfully connected to the
terminal device, an individual value measurement is started and
the first determined value will be indicated.
SENSORS MEASUREMENTS REPORTS CUSTOMERS SETTINGS
Refresh measured value
11
10
12
9
BP21WP
25,3 °C
Temperature
[24,7 | 25,4] Ø 25
25,3 °C
No. Designation Meaning
9 Numeric value
display
Indicates the minimum, maximum and
average values for the temperature as
well as the current temperature value.
10 Refresh measured
value
button
Performs an individual measurement
and refreshes the displayed values.
11 Menu button Opens the menu for making settings
for the current measurement.
12 Numeric value
display
Indicates the most recently
determined temperature value.
Refreshing the measured value
Proceed as follows to refresh the measured values in the
individual value measurement mode:
1. Press the Refresh measured value button (10) on the
terminal device.
ð The appSensor determines the current measured value
which is then displayed on the terminal device.
2. You can also press the On / off / measurement button (3)
on the appSensor.
ð
The appSensor determines the current measured value
which is then displayed on the terminal device.
Measurement settings
Proceed as follows to adjust the settings for the measurement:
1. Press the Menu button (11) or the free area below the
measured value display.
ð The context menu opens.
2. Adjust the settings as required.
13
14
15
16
MEASUREMENTS
REPORTS
CUSTOMERS SETTINGS SENSORS
Refresh measured value
Reset min / max / Ø
Disconnect sensor
Sensor settings
Start recording
BP21WP
Temperature
[24,7 | 25,4] Ø 25
25,3 °C
25,3 °C
No. Designation Meaning
13 Reset min / max / Ø
button
Deletes the determined values.
14 Disconnect sensor
button
Disconnects the connected
appSensor from the terminal device.
15 Sensor settings
button
Opens the settings menu for the
connected appSensor.
16 Start recording
button
Starts a recording of the determined
measured values for later evaluation.