4
EN
pyrometer controlled via smartphone BP21WP
Warning
Risk of damages or data loss due to magnetic field!
Do not store, carry or use the device in the vicinity of
data storage media or electronic devices such as hard
drives, television units, gas meters or credit cards!
There is a risk of data loss or damages. If possible,
keep the highest safety distance possible (at
least 1 m).
Warning of laser radiation
Laser class 2, P max.: < 1 mW, λ: 400-700 nm,
EN 60825-1:2014
Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class 2, observe the
national regulations on wearing eye protection.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
Used in combination with Trotec's MultiMeasure Mobile app the
pyrometer permits non-contact, infrared surface temperature
measurements. The pyrometer comes equipped with an on-
demand multi-point laser which does not serve for temperature
measurements but is instead used as aiming aid for the surface
to be measured.
In case of individual measurements, the measurement value
display can be refreshed both via the app and by a brief
actuation of the measurement button at the measuring device.
Apart from the hold function, the measuring device can indicate
minimum, maximum and average values and carry out series
measurements.
In the app you can specify MAX and MIN alarm thresholds for all
parameters measured with the device.
In case of a matrix measurement the measured values can be
displayed two-dimensionally (XY-diagram) with a background
image or grid.
The measurement results can be displayed and saved on the
terminal device either numerically or in form of a chart. Then,
the measurement data can be sent in PDF or Excel format.
The app also includes a report generation function, an organiser
function, one for customer management and further analysis
options. Moreover, it is possible to share measurements and
project data with colleagues in another subsidiary. If
MultiMeasure Studio Professional is installed on a PC, you can
even use report templates and ready-made text blocks for
various fields of application to turn the data into professional
reports.
Measuring spot
Observe the ratio of the distance (D) to the measuring spot
diameter (S). The larger the distance to the object, the larger the
measuring spot diameter and hence, the less precise the
measured result. The device calculates an average temperature
from all the temperatures in the measuring spot.
The sensor has a geometric resolution of 10:1 (D:S).
