Trotec 3510006031, Руководство по эксплуатации

Страница: 11 / 17

EN 11 pyrometer controlled via smartphone BP21WP
Then start to carry out the measurements.
1. Always start a matrix measurement in the top left corner
(1st row, 1st column).
ð
The grid field to be measured flashes.
2. Perform the measurement in the flashing grid field.
3. Confirm the measured value by pressing the
Measured
value data logging button (22). You can reset a logged
value by pressing UNDO (23). You can skip the indicated
grid field and continue with the measurement in the next
by pressing the
SKIP button (24).
ð
The displayed measurement grid (21) moves on to the
next line.
4. Perform the next measurement at the given point.
17
9
21
22
23
SENSORS MEASUREMENTS REPORTS CUSTOMERS SETTINGS
Measured value for 1.3
Use
Undo
Skip
24
BP21WP
[24,7 | 25,4] Ø 25
Temperature 25,3 °C
Info
By use of the slider you can optionally bring out either
the background image or the grid.
No. Designation Meaning
9 Numeric value
display
Indicates the minimum, maximum and
average values for the temperature as
well as the current temperature value.
17 REC button Opens the context menu for sensors.
21 Measuring field
with grid
Indicates the measurement grid of the
measuring field (grid field to be
measured flashes red).
22 Measured value
data logging
button
Saves the measured value for the
flashing grid field.
23 UNDO button Deletes the saved measured value for
the respective grid field.
24 SKIP button Skips the grid field flashing red and
moves on to the next grid field.
Stopping a recording
Proceed as follows to stop recording the measured values:
1. Press the REC button (17).
ð
The context menu for sensors opens.
2. Press the Stop recording button (28).
ð
The context menu for saving the recording opens.
3. You can optionally save, discard or resume the
measurement.
SENSORS MEASUREMENTS REPORTS CUSTOMERS SETTINGS
Reset min / max / Ø
Disconnect sensor
Sensor settings
Stop recording
17
28
BP21WP
Temperature
[24,7 | 25,4] Ø 25
25,3 °C
No. Designation Meaning
17 REC button Opens the sensor settings menu.
28 Stop recording
button
Stops the current recording of
measured values.
Opens the submenu for saving
recordings.