EN
5
CO₂ air quality data logger BZ30
Technical data
Parameter
Value
Model
BZ30
Article number
3.510.205.015
Weight (packaging
excluded)
approx. 245 g
Dimensions
(length x width x
height)
90 mm x 110 mm x 98 mm
Display
LCD (monochrome)
Carbon dioxide (ppm)
Carbon dioxide
sensor
NDIR sensor (non-dispersive infrared)
Measuring range
0 to 9999 ppm
Accuracy
±5 % or ±75 ppm
Resolution
1 ppm
Relative humidity
Measuring range
0.0 % RH to 99.9 % RH
Accuracy
± 5 % RH
Resolution
0.1 %
Air temperature
Measuring range
-5 °C to 50 °C or 23°F to 122 °F
Accuracy
±1 °C or ±1.8 °F
Measuring range
resolution
0.1 °C/ °F
Ambient conditions
Operation
-5 °C to 50 °C or 23 °F to 122 °F
and 90 % RH (non-condensing)
Storage
-5 °C to 50 °C or 23 °F to 122 °F
and 90 % RH (non-condensing)
Power supply
1 x 3.7 V Li-ion battery or 230 V power
adapter
Memory organisation
Sampling interval
> 1 s
Saving interval
> 1 s
Memory
50,000 measured values
Scope of delivery
•
1 x Measuring device
BZ30
•
1 x 3.7 V Li-ion battery
•
1 x Power adapter
•
1 x USB connection cable
•
1 x CD-ROM with Smartgraph PC software
•
1 x Operating manual
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
The supplied Li-ion batteries are subjects to the requirements of
dangerous goods legislation.
Observe the following when transporting or shipping Li-ion
batteries:
•
The user may transport the batteries by road without any
additional requirements.
•
If transport is carried out by third parties (e.g. air transport
or forwarding company), special requirements as to
packaging and labelling must be observed. This includes
consulting a dangerous goods specialist when preparing
the package.
– Only ship batteries if their housing is undamaged.
– Mask open terminals with tape and pack the battery in
a way that it cannot move inside the packaging.
– Please also observe any other national regulations.
The manufacturer packed the device to the best of his abilities
to protect it against transport damage.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
protected from dust and direct sunlight
•
The storage temperature is the same as the range given in
the Technical data chapter.
•
When storing the device for an extended period of time,
remove the battery/batteries.
