13
Operating manual – Videoscope VSC3008
EN
Update firmware
Note:
The firmware should only be updated after consultation with the
dealer or manufacturer.
The firmware update must have been loaded onto the inserted SD
card beforehand. The firmware update must
not
be located in a
subfolder.
1. Use the cursor to select the
Firmware Update
option.
2. Press the cursor to open the Firmware Update menu.
3. Select the desired setting using the cursor.
4. Press the cursor to confirm your selection.
Battery change
Caution!
Make sure that the surface of the device is dry and the
device is switched off.
1. Press the button (19) on the rear of the battery pack.
2. Hold the button and pull the battery pack out of the device.
3. Push the new battery pack into the device until it engages.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Ensure that
no moisture enters the housing. Do not use any sprays, solvents,
alcohol-based cleaning agents or abrasive cleaners. Only use
clean water to moisten the cloth.
Repair
Do not modify the device or install any spare parts. For repairs or
device testing, contact the manufacturer.
Maintenance and repair
19
