5
Operating manual – Videoscope VSC3008
EN
Transport
Use the supplied case (18) to transport the device.
Storage
When the device is not being used, observe the following storage
conditions:
• dry,
• protected from dust and direct sunlight,
• with a plastic cover to protect it from invasive dust, if
necessary.
• The storage temperature is the same as the range given in
the chapter Technical data.
• When storing the device for a long time, remove the batteries.
• Preferably use the supplied case to store the device.
Inserting the battery pack
Before using the device for the first time, it may be necessary to
insert the battery pack.
Caution!
Make sure that the surface of the device is dry and the
device is switched off.
1. Observing the correct orientation, push the battery pack into
the device until it engages.
Note:
Alternatively, the device can be operated with the power adapter
connected. For this purpose, connect the supplied power adapter
with the connector (16).
Caution!
Only use the supplied power adapter or a power adapter
with identical specifications! An unsuitable power adapter
can cause damage to the device!
Charging the battery pack
Before using the device for the first time, it may be necessary to
charge the battery.
• The battery can either be inserted in the device or removed
for charging.
• If the battery is inserted, the device should be switched off
during charging.
1. Plug the power adapter into the connector at the battery pack
(20).
2. Plug the power adapter into the socket.
– The battery is charging.
Note:
The power adapter may become hot during charging of the
battery pack, particularly if the videoscope is operated while the
power adapter is connected. This is normal and does not affect its
functioning.
Transport and storage
18
Operation
19
20
