Trotec 1430000051, Оригинальное руководство пользователя

Страница: 10 / 29

10 EN oil heater IDX 20 D / IDX 31 D / IDX 50 D
2. Unscrew the fuel tank cap (9).
9
8
3. Fill the tank. In doing so, observe the filling level
indication (8). Stop filling the tank just before the red
range.
4. Screw the fuel tank cap (9) back onto the tank. Observe
the recesses at the tank opening and the protrusions at the
fuel tank cap. They must be aligned when attaching the
fuel tank cap. Make sure that the fuel tank cap is firmly
attached to avoid leakage.
Operation
The device may only be used by accordingly instructed persons.
Operating elements IDX 20 D
11
13
15
14
Operating elements IDX 31 D and IDX 50 D
11 12
15
13
14
No. Designation
11 Operating LED
12 Desired room temperature indication
13 Room temperature indication
14 On/off switch
15 Rotary control thermostat
Switching the device on
Wear hearing protection.
Excessive noise can lead to hearing loss.
The device continues to operate until the desired room
temperature is reached.
1. Set the on/off switch (14) to position I .
ð
The operating light (11) is illuminated.
2. Set the rotary control (15) to the desired room
temperature. This value should be higher than the current
room temperature.
ð
The following note only applies to IDX 31 D and
IDX 50 D
: The desired room temperature is displayed
via the desired room temperature indication (12).