1. Matter needs attention
The internal structure of the UltraBot 3D printer contains
moving parts. Avoid directly touching the moving parts
with your hands during the printing process to avoid Injury.
Please use the printer in a shaded, ventilated, flat, clean and
safe environment. The resin will cure when exposed to light,
and direct sunlight should be avoided.
Watch to the printer for moisture and dust.
There are many delicate parts to every printer , and the
warranty varies depending on the individual part.
When cleaning the resin and the model, please wear
gloves to avoid direct contact with the resin on the skin
(people with resin allergy should not use this machine).
Please operate the printer in strict accordance with the
manual. Do not disassemble and assemble the machine
without permission.
After receiving the printer, please check if the accessories are
there, if there is any missing, please contact the customer
service.
Please keep the printer out of the reach of children.
In case of emergency, turn off the power and unplug
the printer.
When removing the model from the platform, do not
point the tool to your hand to prevent injury.
2
