User Manual Qiwi Lite
Support: www.tronteq.de/support
Release 11/2016
Seite 16 von 31
6.4.
VLAN
VLANs allow to segment a network and to operate this as a plurality of small networks.
Therefore tagged VLANs as well as port-based VLANs are available.
VLANs can be set up in the web interface at
Configuration > VLAN
.
The configuration possibilities are versatile, VLANs between all ports are allowed or disallowed in any
way. The table shows the possibilities: Packets that are at the port in the first column are only
forwarded to ports which have a check mark in the row of the respective port.
In most cases the switching for incoming and outgoing traffic is symmetric. To activate symmetric
features, click on the check box “symmetric”. To apply the chosen settings click on “submit all”.
For better and faster configuration just click on “check all” or “clear all” to
select all or none interfaces. Confirm the setting with “submit all”.
The following image shows the configuration of two VLAN network consisting of ports 1, 2, 3, 4 and 5,
port 6 is in both network.
Therefore ports 1, 2, 3 can’t transfer data to ports 4, 5. Port 6 is connected with all ports.
