background image

18            P5629.1600 Rev A  

8.  MECHANICAL DETAILS 

Enclosure dimensions

Width

Height

Depth

Weight

45mm

147mm

155mm

357g

 

All values are approximate

 Mounting

•  The TX2124 module will clip onto standard DIN Rail (TS35)

•  Black plastic clips from the top and bottom of the module can be pulled out to 

allow it to sit over the DIN Rail, the clips will then be pushed back into place to 
secure the module.

9. ENVIRONMENTAL

Operating Temperature

-40°C…+70°C

Storage Temperature

-40°C…+70°C

Humidity

0…95% RH, non-condensing

Ingress Protection

Select enclosure to suit application, see certificates for information.

10.  WASTE REMOVAL INFORMATION

The Electronic equipment within must not be treated as general waste. By 
ensuring that this product is disposed of correctly, you will be helping to prevent 
potentially negative consequences for the environment and human health, which 
could otherwise be caused by incorrect waste handling of this product.

For more detailed information about take-back and equipment recycling please contact your 
local Trolex representative.

11. CONFORMITY

Refer to Declaration of Conformity

12. MAINTENANCE

There is no routine maintenance required

www.trolex.com

Содержание TX2124

























Отзывы: