Trojan RECUMBENT 400, Руководство пользователя

Страница: 16 / 32

16
10318
ASSEMBLY STEPS
STEP 4:
• Attach the Bench Press Arm (13) to the Main Base
(1) using one Pivot Shaft Ø19 X 280 mm (84), two
Washers 5/8” (92), two Lock Nuts 5/8” (87) and
two Plastic Dome Caps 5/8” (43).
• Insert the Adjustable Press Frame A & B (17,18) into
the Bench Press Arm (13) using Pop Pin Pt-1B (51)
to secure them in place.
STEP 5:
• Attach the Seat Cushion Support (9) to the Seat
Support Post (10) using one Hex Bolt 3/8” x 2-1/2”
(72), two Washers 3/8” (90) and one Lock Nut 3/8” (85).
• Attach the Seat Cushion Support (9) to the Vertical
Post (3) using two Hex Bolts 3/8” x 2-1/8” (75), four
Washers 3/8” (90) and two Lock Nuts 3/8” (85).
• Attach the Seat Support Post (10) to the Main Base (1)
using two Hex Bolts 3/8” x 4-1/8” (94), four Washers
3/8” (90) and two Lock Nuts 3/8” (85).
• Attach the Leg
Extension (11) to
the Seat Support
Post (10) using one
Hex Bolt 1/2” X
3-3/8” (77), two
Washers 1/2” (91)
and one Lock Nut
1/2” (86). Plug two
Plastic Dome Caps
1/2” (45) onto the
Lock Nut 1/2” (86)
and Hex Bolt 1/2” X
3-3/8” (77).
5
4