Trojan RECUMBENT 400 Скачать руководство пользователя страница 30

Страница: 30 / 32

10318

FREQUENTLY ASKED QUESTIONS

Q1. How Do I Maintain My Cables?

1. The cables work in conjunction with the pulleys. When assembling the unit, make sure not to over-tighten

the pulleys. The pulleys are meant to move freely.

2. Before your workout, make sure all the cables are lined up correctly on the pulleys.

Q2. My Moveable Parts Are Not Moving Freely?

1. Make sure not to over-tighten the oil bushes as the butterfly arms have to move freely.

2. Do not over-tighten any bolt or nut which has bushes and moveable parts.

Q3. My Weight Stack Is Not Moving Freely

1. Apply a light coating of grease to the guide tubes, as this will help reduce any unnecessary friction.

Q4. My Gym Is Not Stable

1. Ensure that all nuts and bolts are tightened and that the gym is set up on a level surface.

Q5. Is It A Good Idea To Use My Gym In A Commercial Gym?

1. No, it is for domestic use only.

Содержание RECUMBENT 400

































Результаты поиска

Содержание RECUMBENT 400

Отзывы:

Похожие инструкции для RECUMBENT 400

Бренды по названию

Популярные бренды

Trojan RECUMBENT 400, Руководство пользователя

Результаты поиска

Содержание RECUMBENT 400

Отзывы:

Похожие инструкции для RECUMBENT 400

Бренды по названию

Популярные бренды