Trojan RECUMBENT 300, Инструкция по уходу и руководство по сборке

Страница: 9 / 20

10163-9
ASSEMBLY STEPS
STEP 4
• Attach the Seat Frame (53) onto the Rear Frame (19)
using 4 Carriage Bolts (55), 4 Washers (18) and
4 Nylock Nuts (31).
STEP 5
• Attach the Seat (52) onto the Seat Frame (53) using
4 Bolts (50) and 4 Washers (49).
STEP 6
• Attach the Back Cushion (54) onto the
Seat Frame (53) using 4 Bolts (50) and 4 Washers (49).
STEP 7
• Connect the Sensor Wire (45) to the Extension Wire (44).
• Connect the Pulse Wires (40) to the Pulse Wires (69).
• Insert the Resistance Cable (43) into the Upright Tube (37).
• Insert the Upright Tube (37) into the lower tube on the
Main Frame (1) and secure it using 4 Screws (17),
2 Washers (18) and 2 Arc Washers (30), as shown in the
illustration.
Caution
: Ensure that cables are not damaged
during assembly or when tightening screws