Trojan RECUMBENT 300, Инструкция по уходу и руководство по сборке

Страница: 10 / 20

10163-10
ASSEMBLY STEPS
Recheck
all bolts and nuts are
tightened securely
before using the machine
STEP 8
• Pull the Resistance Cable (43) out of the square hole
and connect it with the Resistance Cable (46) as follows:
• Put the Cable End (46) into the Spring Hook (43).
• Pull the knob and force the Short Cable, on
Tension Knob (46), into the gap of the bracket (43).
See illustrations A and B.
• Insert the Tension Knob (46) into the Handle Bar Post
(64) and secure with the Screw on the Tension Knob (46).
• Tension is increased by turning the knob clockwise.
STEP 9
• Connect the Extension Wires (44) and the Pulse Wires
(69) with the respective wires on the Computer (60).
• Slide the Computer (60) onto the fixed plate on the
Upright Tube (37).
Caution
: Ensure that cables are not damaged
during assembly or when tightening screws