Trojan IGNITE 360, Руководство пользователя

Страница: 11 / 25

11
USER MODE OPERATION:
COUNTDOWN TRAINING:
To select a countdown program, press SET to select between the Time
countdown workout, DISTANCE countdown workout or the CALORIE
countdown workout. Press CLEAR to exit the program.
TIME COUNTDOWN
Press SET until the TIME flashes and displays 30:00. Press SPEED + or – to
WORKOUT:
select a time between 5 and 99 minutes. Press START / STOP to start at
speed of 1.0 km/h. The speed can be adjusted by pressing SPEED + or – . The
workout will be completed and the Trojan Ignite 360 Treadmill will come to
a stop once the time reaches 0:00.
DISTANCE COUNTDOWN
Press SET until DISTANCE flashes and displays 1.0 km. Press SPEED + or – to
WORKOUT:
choose a distance between 1.00 and 9.00 km, Press START / STOP to start
at speed of 1.0 km/h. The speed can be adjusted by pressing SPEED + or
–. The workout will be completed and the Trojan Ignite 360 Treadmill will
come to a stop once the distance reaches 0,00 km.
CALORIE COUNTDOWN
Pressing SET while the Trojan Ignite 360 Treadmill is on, will allow you to
WORKOUT:
set Time, Distance or Calorie countdown program as the target for your
workout. The values are adjusted by pressing SPEED + to increase or SPEED
– to decrease the values. Press CLEAR to exit.
NOTE:
Ensure that the Trojan Ignite 360 Treadmill is on to select the above settings.
GETTING STARTED:
Power the Trojan Ignite 360 Treadmill on by plugging it into an appropriate
wall outlet, then turn on the power switch located at the front of the
Trojan Ignite 360 Treadmill below the motor shield. Ensure that the safety
key is installed, as the Trojan Ignite 360 Treadmill will not power on
without it. When the power is turned on, all the lights on the display will
light up momentarily to show that there is power.
SELF-CHECKING: •
When using for the first time, it is necessary to conduct a self-check.
• Remove the safety key, press MODE and hold, then insert the safety
key again, the machine enters into self-checking state. During this state,
pressing START / STOP can terminate the self-checking.
QUICK-START OPERATION:
• Press and release the START / STOP to turn the display on if it has gone
into standby.
• Note: Installing the safety key will also bring the Console out of standby.
• Press and release the START / STOP to start the running belt at 1.0 km/h.
• Adjust to the desired speed, press the SPEED + or – buttons. You may also
use the Instant Speed Keys 3, 6 and 9. You can also use HANDRAIL SPEED +
or – to adjust the speed.
• To slow the Trojan Ignite 360 Treadmill down, press and hold the SPEED –
key to until your desired speed. You may also press the Instant Speed Keys
CONSOLE FUNCTIONS