1377AU-6
MONITOR’S INSTALLATION INSTRUCTION
STEP 01
Before installing the two clamps onto the handlebar
(5), please orient Clamp A & Clamp B as shown at
photos.
STEP 02
Fasten the top of the 2 clamps using a Hex Nut & a Philip
Screw of 20mm long.
STEP 03
Turn back the handlebar (5), and using a Self-Tapping
Screw of 20mm sing a long to fasten the bottoms of two
clamps.
STEP 04
Slide the monitor (23) into the monitor clamps as
illustrated.
STEP 05
Slide the RPM sensor into the sensor housing , please
make sure the front endof the RPM sensor to be 1-2mm
away from the magnet to enable the good induction.
STEP 06
Guide the sensor wire through the white plastic holder,
and bind it.
Congratulations !
You’ve installed the monitor successfully !
Содержание ENDURO 300
Страница 13: ...1377AU 13 EXPLODED VIEW ...