1377AU-7
OPERATING INSTRUCTIONS
1. Emergency Brake
This bike can be stopped immediately by pushing down on the tension
knob. (Fig1)
2. Resistance Adjustment
• Pedaling resistance is controlled by the tension control knob. (Fig1)
• To increase resistance, turn the tension control knob clockwise (+).
• To decrease resistance, turn the tension control knob counterclockwise
(-).
• Resistance adjustment can be easily made at any time.
3. Leveling the Bike
• This bike can be leveled to compensate for uneven surfaces.
• To level the bike, please raise or lower the four leveler feet located on
the underside of the front and rear stabilizers. (Fig2)
4. Seat Adjustment
• Appropriate seat height helps improve your exercise efficiency &
reduce the risk of injury
• Adjusting the seat forward or backward helps you work on different
lower body muscle groups.
4.1 Place your foot in the toe clip, then get on the bike.
4.2 If your leg is bent too much, you should move the seat up. If your
foot can not touch the pedal or your leg is too straight, you should
move the seat down.
4.3 Dismount the bike. Loosen and pull the pop pin (Fig3-1), then raise
or lower the seat post to the desired position.
4.4 Loosen and pull the pop pin (Fig3-2), then move the seat slider
forward or backward to the desired position. When the seat slider
is in the desired position, secure the pop pin firmly.
Содержание ENDURO 300
Страница 13: ...1377AU 13 EXPLODED VIEW ...