Trojan ELITE GYM 2.0 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 40

background image

27

EGYM

ASSEMBLY STEPS

ASSEMBLY STEPS

STEP 13: LAT CABLE (118) - CABLE LOOP ASSEMBLY DIAGRAM

After the Machine is assembled, check whether the cable is tensioned. At correct tension, there should be a gap of
3-5 mm between the Top Plate and the Weight Stack. If the Cable is slightly loose, adjust it by tightening the Bolt at
the top of the weight stack. If the Cable is very loose, adjust the length of Coil Chain (115), using the Snap Link (114).

Lat Cable (118)

1. Feed the Lat Cable (118) with the Bolt End (F), through the Top Beam (6) starting at Point (A) shown in the diagram.

2. Attach a Pulley (52) to Hole (A) (as in view N) using 1 Hex Bolt (M10 x 70) (93), 2 Washers (Ø10) (108),

2 Plastic Bushings (76) and 1 Nylon Lock Nut (M10) (101).

3. Feed the Lat Cable (118) through to Hole (B).

4. Attach a Pulley (52) to Hole (B) (as in view N) using 1 Hex Bolt (M10 x 70) (93), 2 Washers (Ø10) (108),

2 Plastic Bushings (76) and 1 Nylon Lock Nut (M10) (101).

5. Feed the Lat Cable (118) to Point (C), this cable will only be fed through the Top Pulley.

6. As shown in View (M) assemble 2 Pulleys (52) to the Double Pulley Rack (27) using 2 Hex Bolts (M10 x 45) (91),

4 Washers (Ø10) (108) and 2 Nylon Lock Nuts (M10) (101).

7. Feed the Lat Cable (118) to Point (D).

8. Attach a Pulley (52) to Point (D) on the Pec Top Beam (21) using 1 Hex Bolt (M10 x 45) (91),

2 Washers (Ø10) (108) and 1 Nylon Lock Nut (M10) (101).

9. Feed the Lat Cable (118) to Point (E).

10. Attach a Pulley (52) to Point (E) on the Pec Top Beam (21) using 1 Hex Bolt (M10 x 45) (91),

2 Washers (Ø10) (108) and 1 Nylon Lock Nut (M10) (101).

11. Point (F) of the Lat Cable (118) has the Bolt End. This Bolt End needs to be screwed into the Top Weight Plate (36).

Tension can be adjusted by loosening and tightening the Nut.

12. Attach a Snap Link (114) to the (A) (Ball end) of the Lat Cable (118).

13. Attach Comfort Grips (75) to each end of the Lat Bar (44).

14. Hook the Lat Bar (44) to the Snap Link (114).

15. As shown in View (O) the Lat Bar can be Hooked on the end of the Top Beam (6).

#19M09T004 Elite Gym 2.0 UM A4.indd 27

2019/09/17 3:20 PM

«
...
25
26
27
28
29
...
»

Содержание ELITE GYM 2.0









































Отзывы:

Нет отзывов

Похожие инструкции для ELITE GYM 2.0

Бренд: Body Solid Страницы: 32

Flat Bench Sa 10-4

Бренд: Weider Страницы: 8

Бренд: Weider Страницы: 23

Бренд: Weider Страницы: 28

Бренд: Bowflex Revolution Страницы: 25

Бренд: ParaBody Страницы: 10

Бренд: V-fit-ST Страницы: 28

Бренд: ParaBody Страницы: 27

Бренд: Casall Страницы: 13

Бренд: ParaBody Страницы: 12

Бренд: Hammer Страницы: 12

Бренд: BH FITNESS Страницы: 39

Бренд: BH FITNESS Страницы: 47

WAVERTONE 180 AB2360

Бренд: Thane Fitness Страницы: 7

Бренд: Thane Fitness Страницы: 15

Бренд: ParaBody Страницы: 1

Бренд: FitEngine Страницы: 50

Бренд: CORE ENERGY FITNESS Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды