Trix 24126, Руководство пользователя

Страница: 12 / 60

12
Programming
• The characteristics can be changed repeatedly using the
Configuration Variables (CV).
• The CV numbers and the CV values are entered directly.
• The CVs can be read and programmed repeatedly. (Pro -
gramming is done on the programming track.)
• The CVs can be programmed, as you desire. PoM (Pro -
gramming on the layout track) is only possible with those
CVs marked in the CV table. PoM must be supported
by your central controller (see the instructions for your
controller).
• The default settings (factory settings) can be produced
repeatedly.
• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
Controllable Functions
DC MS I
1
MS II CS I/II CS III
Work lights / Headlights F0
Smoke generator F1
Sound effect: Rotary plow blades F2
Sound effect: Stream engine F3
Choose between work lights and
headlights
F4
Sound effect: Long whistle blast F5
1 Trix Systems