background image

General Information

75

Stands

Side stand

1.

Side stand

The motorcycle is equipped with a side
stand on which the motorcycle can be
parked.

Note:

When using the side stand, always
turn the handlebars fully to the left
and leave the motorcycle in first
gear.

Whenever the side stand is used, before
riding, always ensure that the side stand
is fully up after first sitting on the
motorcycle.

For instructions on safe parking, refer to
the How to Ride the Motorcycle section.

Centre Stand (If Fitted)

1.

Centre stand

To set the motorcycle on the centre
stand, hold the motorcycle upright, step
down firmly on the foot finder part of
the stand, then lift the motorcycle up
and to the rear using the rear grab rail
as a handhold. For instructions on safe
parking, refer to the How to Ride the
Motorcycle section.

Warning

The motorcycle is fitted with an
interlock system to prevent it from
being ridden with the side stand in the
down position. 

Never attempt to ride with the side
stand down or interfere with the
interlock mechanism as this will cause
a dangerous riding condition leading
to loss of motorcycle control and an
accident.

1

cgiu

Caution

Do not use body panels or the seat as
a hand-hold when placing the
motorcycle on the centre stand as
this will cause damage.

1

cini_1

Содержание XCX











































































































































































Отзывы: