Triumph XCX Скачать руководство пользователя страница 47

Страница: 47 / 170

General Information

Note:

•

The riding mode will default to ROAD
when the ignition is switched ON if:

The OFF ROAD Mode was active the
last time the ignition was switched
off; or

The RIDER Mode was active the last
time the ignition was switched off
with ABS and/or TTC set to Off Road
or Off.

•

Otherwise, the last selected riding
mode will be remembered and
activated when the ignition is
switched ON.

Selecting a Riding Mode – with the
Motorcycle Stationary

Note:

•

If the ignition is switched on and the
engine not started, the instruments
will display the odometer for five
seconds. During this time, no mode
changes can be made.

Press and release the MODE button on
the instrument housing until the desired
riding mode is flashing in the display.

MODE button

Selected riding mode (flashing)

Current (active) riding mode

Note:

•

The selected riding mode is
automatically activated one second
after the MODE button is pressed, if
the following conditions are met:

Содержание XCX











































































































































































Результаты поиска

Содержание XCX

Отзывы:

Бренды по названию

Популярные бренды

Triumph XCX, Руководство пользователя

Результаты поиска

Содержание XCX

Отзывы:

Бренды по названию

Популярные бренды