Triumph Tiger 850 Sport 2020, Руководство пользователя

Страница: 31 / 200

General Information
31
Note
During daylight hours the daytime
running lights improve the motorcycles
visibility to other road users.
Low beam headlights must be used
in any other conditions unless the
road conditions allow for high beam
headlights to be used.
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the display screen.
Further presses of the MODE button
will scroll through the available riding
modes, see Riding Mode Selection on
page 50.
Press and hold the MODE button when
a riding mode is selected provides
direct access to the riding mode’s
configuration menu.
For more information on riding mode
selection and configuration, see page 53.
Turn Signal Switch
When the turn signal switch is pushed
to the left or right and released, the
corresponding turn signals will flash
on and off. To turn off the turn signals,
push and release the switch in the
central position.
Automatic Self-Canceling Turn Signals
A short press and release of the turn
signal switch to the left or right will
cause the corresponding turn signals to
flash on and off three times, then go off.
A longer press and release of the turn
signal switch to the left or right will
cause the corresponding turn signals to
flash on and off.
The turn signals are automatically
turned off after eight seconds and after
riding a further 71 yards (65 meters).
To disable the turn signal self-cancel
system refer to the Bike Setup section
on page 56.
The turn signals can be canceled
manually. To manually turn off the turn
signal, press and release the turn signal
switch in the central position.
Joystick Button
The Joystick is used to operate the
following functions of the instruments:
• Up–scroll the menu from the bottom
to the top
• Down–scroll the menu from the top
to the bottom
• Left–scroll the menu to the left
• Right–scroll the menu to the right
• Center–press to confirm selection.
Horn Button
When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.
Heated Grips Switch
The heated grips will only heat when
the engine is running.
When the heated grips are switched on,
the heated grips symbol will appear in
the display and the selected heat level
will be shown.