Maintenance
135
Drive Chain Free Movement Adjustment
The vertical movement of the drive
chain must be in the range shown in the
following table.
Model
Vertical Movement
Range
Tiger 900 GT (LRH)
0.79–1.18 in
(20–30 mm)
Tiger 850 Sport
Tiger 900 GT
Tiger 900 GT Pro
0.98–1.38 in
(25–35 mm)
Tiger 900 Rally
Tiger 900 Rally Pro
1.18–1.57 in
(30–40 mm)
1
2
3
4
5
1. Adjuster bolt lock nut
2. Adjuster bolt
3. Rear wheel spindle nut
4. Spindle adjuster
5. Adjuster markers
To adjust the drive chain free movement:
• Loosen the wheel spindle nut.
• Loosen the lock nuts on both the
left hand and right hand drive chain
adjuster bolts.
• Moving both adjusters by an
equal amount, turn the adjuster
bolts clockwise to increase
drive chain free movement and
counterclockwise to reduce drive
chain free movement.
• When the correct amount of drive
chain free movement has been set,
push the wheel into firm contact
with the adjusters.
• Tighten both adjuster lock nuts to
15 lbf ft (20 Nm) and the rear wheel
spindle nut to 81 lbf ft (110 Nm).
• Repeat the drive chain adjustment
check. Readjust if necessary.
Warning
Operation of the motorcycle with
insecure adjuster lock nuts or a
loose wheel spindle may result in
impaired stability and handling of the
motorcycle.
This impaired stability and handling
may lead to loss of control or an
accident.
• Check the rear brake effectiveness.
Rectify if necessary.
Warning
It is dangerous to operate the
motorcycle with defective brakes; you
must have your authorized Triumph
dealer take remedial action before you
attempt to ride the motorcycle again.
Failure to take remedial action may
reduce braking efficiency leading
to loss of motorcycle control or an
accident.
Содержание Tiger 850 Sport 2020
