Triumph STREET TRIPLE Скачать руководство пользователя страница 90

Страница: 90 / 134

Maintenance and Adjustment

Chain and Sprocket Wear Inspection

Measure across 20 links

2. Weight

Remove the chain guard.

Stretch the chain taut by hanging a
10 - 20 kg weight on the chain.

Measure the length of 20 links on the
straight part of the chain from pin centre of
the 1

pin to the pin centre of the 21

pin.

Since the chain may wear unevenly, take
measurements in several places.

If the length exceeds the maximum service
limit of 319 mm, the chain must be replaced.

Rotate the rear wheel and inspect the drive
chain for damaged rollers, and loose pins and
links.

Also inspect the sprockets for unevenly or
excessively worn or damaged teeth.

If there is any irregularity, have the drive
chain and/or the sprockets replaced by an
authorised Triumph dealer.

Replace the chain guard.

Warning

The use of non-approved chains may result
in a broken chain or may cause the chain
to jump off the sprockets.

Use a genuine Triumph supplied chain as
specified in the Triumph Parts Catalogue.

Never neglect chain maintenance and
always have chains installed by an
authorised Triumph dealer.

Caution

If the sprockets are found to be worn,
always replace the sprockets and drive
chain together.

Replacing worn sprockets without also
replacing the chain will lead to premature
wear of the new sprockets.

WORN TOOTH

(ENGINE SPROCKET)

WORN TOOTH

(REAR SPROCKET)

(Sprocket wear exaggerated

for illustrative purposes)

ccol

Содержание STREET TRIPLE







































































































































Результаты поиска

Содержание STREET TRIPLE

Отзывы:

Похожие инструкции для STREET TRIPLE

Бренды по названию

Популярные бренды

Triumph STREET TRIPLE, Руководство пользователя

Результаты поиска

Содержание STREET TRIPLE

Отзывы:

Похожие инструкции для STREET TRIPLE

Бренды по названию

Популярные бренды