Triumph STREET TRIPLE, Руководство пользователя

Страница: 37 / 134

37
General Information
System Display
1. TPMS symbol
2. Tyre pressure display
3. Front tyre, identified
4. Rear tyre, identified
To access the tyre pressure display, turn the
ignition to the ON position.
Press and release button 'A' until psi or bAr is
visible in the display screen.
Press and release button 'B' to select the front
or rear tyre pressure.
When the tyre pressure monitoring system
has been selected, —— psi or bAr will be
visible in the display screen until the
motorcycle is travelling at a speed greater
than 12 mph (20 km) and the tyre pressure
signal is received.
To exit the tyre pressure display, press and
release button 'A' to the desired display.
Sensor Batteries
When the battery voltage in a pressure
sensor is low, 'lo bAtt' will be displayed for
eight seconds and the TPMS symbol will
indicate which wheel sensor has the low
battery voltage. If the batteries are completely
flat, only dashes will be visible in the display
screen, the red TPMS warning light will be
on and the TPMS symbol will flash
continuously. Contact your authorised
Triumph dealer to have the sensor replaced
and the new serial number recorded in the
spaces provided on page
36 .
1. TPMS symbol
2. Display screen
3. Front tyre, identified
4. Rear tyre, identified
5. TPMS warning light
4
3
2
1
F
R
4
2
1
3
5