Triumph STREET TRIPLE, Руководство пользователя

Страница: 35 / 134

35
General Information
Coolant Temperature Gauge
1. Coolant temperature gauge
The coolant temperature gauge indicates the
temperature of the engine coolant.
When the ignition is switched on, all 8 bars of
the display will be shown. When the engine is
started from cold the display will show 1 bar.
As the temperature increases more bars will
be shown in the display. When the engine is
started from hot the display will show the
relevant number of bars, dependant on
engine temperature.
The normal temperature range is between
3 and 5 bars.
If the coolant temperature becomes too high
the display will show 8 bars and will start to
flash. The high coolant temperature warning
light in the tachometer will also be
illuminated.
Fuel Gauge
1. Fuel gauge
2. Button B
The fuel gauge indicates the amount of fuel
in the tank.
With the ignition switched on, the number of
bars shown in the display indicates the level
of fuel.
When the fuel tank is full all 12 bars are
displayed and when empty, no bars are
displayed. Other gauge markings indicate
intermediate fuel levels between full and
empty.
When 2 bars are displayed the low fuel
warning light will illuminate. This indicates
there are approximately 3.5 litres of fuel
remaining in the tank and you should refuel
at the earliest opportunity. If a trip meter
display is visible, the range to empty display
can be selected by pressing and releasing
button 'B' until it is visible.
After refuelling, the fuel gauge and range to
empty information will be updated only while
riding the motorcycle. Depending on the
riding style, updating could take up to
five minutes.
Caution
Do not continue to run the engine if either
of the high temperature warnings are
displayed as severe engine damage may
result.
1
cfik
1
2