Triumph STREET TRIPLE, Руководство пользователя

Страница: 51 / 134

51
General Information
Seat Care
To prevent damage to the seat or seat cover,
care must be taken not to drop or lean the
seat against any surface which may damage
the seat or seat cover.
To refit the seat, engage the seat’s tongue
under the fuel tank and press down at the
rear to engage in the seat lock. An audible
click can be heard when the seat is fully
engaged in its lock.
Running-In
Running-in is the name given to the process
that occurs during the first hours of a new
vehicle's operation.
In particular, internal friction in the engine will
be higher when components are new. Later
on, when continued operation of the engine
has ensured that the components have
'bedded in', this internal friction will be
greatly reduced.
A period of careful running-in will ensure
lower exhaust emissions, and will optimise
performance, fuel economy and longevity of
the engine and other motorcycle
components.
During the first 500 miles (800 kilometres):
• Do not use full throttle.
• Avoid high engine speeds at all times.
• Avoid riding at one constant engine
speed, whether fast or slow, for a long
period of time.
• Avoid aggressive starts, stops, and rapid
accelerations, except in an emergency.
• Do not ride at speeds greater than 3/4 of
maximum engine speed.
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop the
seat. Do not lean the seat against the
motorcycle or any surface which may
damage the seat or seat cover. Instead,
place the seat, with the seat cover facing
upwards, on a clean, flat surface which is
covered with a soft cloth.
Do not place any item on the seat which
may cause damage or staining to the seat
cover.
Warning
To prevent detachment of the seat during
riding after fitting always grasp the seat
and pull firmly upwards. If the seat is not
correctly secured in the lock, it will detach
from the lock. A loose or detached seat
could cause loss of motorcycle control and
an accident.
R.P.M.