Triumph Speed Triple 1200 RR 2021, Руководство пользователя

Страница: 158 / 212

MAINTENANCE
158
As the lithium technology has a lower
self-discharge rate than lead acid
battery types, this lithium-ion battery
can be stored for longer before
recharging is required. However, as with
all batteries, the cranking performance
will
be affected when ambient
temperatures fall below -5°.
For extended periods of storage (beyond
two weeks) the battery should be
removed from the motorcycle and kept
charged and monitored using an
approved battery charger. This prevents
the
battery from becoming fully
discharged.
To charge the lithium-ion battery, do the
following:
▼
Always remove the battery from the
motorcycle
before charging
separately, see page 155.
▼ Follow the instructions supplied with
the approved battery charger.
▼ Charge the battery with a lower
current than the MAX Charging
Current found on the charging label.
▼
If the battery becomes hot to the
touch, stop charging and allow the
battery to cool before resuming.
▼ After charging, leave the battery for
1 to 2 hours before checking the
voltage. If the voltage is less than
12.4 Volts, additional charging is
necessary.
The lithium-ion battery can be quickly
charged as long as the charge voltage
remains
below 14.7 Volts. A
recommended charging current within
the range of 0.5A – 8A (where A is the
capacity of the battery).
A battery charger will limit the voltage
between 14.0-14.7 Volts when charging.
The battery cannot be fully charged if
the charging voltage is less than 14.0
Volts. The battery can be damaged if
the charging voltage above 14.7 Volts.
Maximum Charge Rates
Battery Label Charge Rate
CCA (-10°C) : 165A
User Charging:
max - 14.7 Volts
8.0Ah (20HR)
User Charging:
max - 8 Amp