MAINTENANCE
118
▼
Apply a thin smear of clean engine oil
to the sealing ring of the new oil
filter.
▼
Fit the oil filter and tighten to 10
Nm
using Triumph service tool T3880313
- Oil Filter Wrench.
▼
After the oil has completely drained
out, fit a new sealing washer to the
drain plug. Fit and tighten the drain
plug to 25
Nm.
▼
Fill the engine with a 10W/40 or
10W/50 semi or fully synthetic
motorcycle engine oil which meets
specification API SH (or higher) and
JASO MA, such as Castrol Power 1
Racing 4T 10W-40 (fully synthetic)
engine oil, sold as Castrol Power RS
Racing 4T 10W-40 (fully synthetic) in
some countries.
▼
Fit the oil filter cover with the wire
guide in the same orientation noted
for removal. Tighten the fixing to 3
Nm.
▼
Attach
the
side
stand
switch
connector to the oil filter cover.
▼
Route the harnesses and hoses
through the wire guide as noted for
removal.
B01551
5
4
2
1
7
6
3
1.
Side stand switch connector
2. Fixing
3. Cover
4. Wire guide
5. Engine subharness
6. Fuel tank drain hose
7.
Coolant expansion tank drain hose
▼
Position the sprocket cover to the
crankcase
with
the
coolant
expansion tank hose, fuel tank vent
hoses and the oxygen sensor
harness positioned as noted for
removal.
▼
Note the lower left hand fixing also
secures the oil filter cover between
the sprocket cover and crankcase.
Содержание Speed Triple 1200 RR 2021
