１３
PERFORMANCE
RAISE LIFT
1. Read operating and safety manuals before using lift.
2. Always lift a vehicle according to the manufacturers recommended lifting points
3. Position vehicle between columns.
4. Adjust swing arms so that the vehicle is positioned with the center of gravity midway between pads.
5. Use truck adapters as needed. Never exceed 9” of pad height.
6. Raise the lift by pressing button on power unit until support contacts underside of the vehicle. Recheck to
make sure vehicle is secure.
7. Raise vehicle to desired working height. The latch mechanism will ‘trip over’ when the lift raises and drop into
each latch stop. But, to lock the lift you must press the Lower level to relieve the hydraulic pressure and let
the latch set tight in a safety position.
Always lock the lift before going under the vehicle. Never allow anyone to go under the lift when raising or
lowering. Read the safety procedures in the manual.
Note: It is normal for an empty lift to lower slowly-it may be necessary to add weight.
LOWER LIFT
1. Be sure tool trays , stands or personal are removed from under vehicle.
2. First to raise the lift until the latch clears.
3. Pull latch release cables on both sides
WARNING: ALWAYS RELEASE BOTH SIDES
4. Press the lever at the power unit to lower the lift.
5. Before removing vehicle from lift area, position lift arms and supports to provide an unobstructed exit.
WARNING: NEVER DRIVE OVER LIFT ARMS
Call 866-563-5438 For Help
13
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
