11. Use a heat gun to shrink the pink coloured sleeves around both joints. When the sleeves are fully shrunk,
allow to cool before taping over each sleeve with black electrical insulation tape. Ensure that the taping
extends past each side of the sleeves by at least 15 mm.
12. Secure the wiring tidily using cable ties.
13. Refit any bodywork and reconnect the battery, positive (red) lead first.
14. Refit the seat.
15. Check the operation of the alarm.
Caution
When shrinking the pink coloured sleeves, take care not to burn any part of the wiring harness or serious
damage will result to the cable. Excessive heat will also cause the tubing to become brittle rendering it
useless.
