8-32
Setup and Registration (System Menu) > System Menu
Disp. Status/Log
[
Menu
] key > [
▲
] [
▼
] key > [
Device Common
] > [
OK
] key > [
▲
] [
▼
] key > [
Disp. Status/Log
] > [
OK
] key
Power Off Timer (models for
Europe)
Select whether to turn off the power automatically after a period of inactivity.
Value
: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
WeeklyTimer Set.
Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Weekly Timer
Select whether to use Weekly Timer.
Value
: Off, On
Schedule
Specify the time for each day of the week at which the machine turns OFF.
Retry Settings
-
Limited Retries
Set whether or not retry of machine power-off is performed.
Value
: Off, On
Retry Times
Set the number of retries for turning OFF this machine.
Value
: 0 to 10 times
NOTE
This function is displayed when [
Limited Retries
] is set to [
On
].
Retry Interval
Set the retry interval.
Value
: 10 to 60 seconds (increments of 10 seconds)
Auto Err. Clear
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value
: Off, On
Err. Clear Timer
If you select [
On
] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value
: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [
Auto Err. Clear
] is set to [
On
].
FormFeed TimeOut
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value
: 5 to 495 seconds (in 5 second increments)
Ping Timeout
Set the time until timeout occurs when [
Ping
] is executed in "Network".
Value
: 1 to 30 seconds (in 1 second increments)
*1 Displayed only when the optional Card Authentication Kit is activated.
*2 Displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item
Description
Disp. Status/Log
Set the display method of the Status/Log.
JobsDetailStatus
Value
: Show All, My Jobs Only, Hide All
Jobs Log
Value
: Show All, My Jobs Only, Hide All
Item
Description
Содержание P-4532DN
