Triumph Adler LP 4235, Инструкция по эксплуатации

Страница: 118 / 211

Using the Operation Panel 7-21
Printing Additional Copies using Quick Copy
1
Press
Z
while
Job Box >
is displayed.
2
Press
U
or
V
repeatedly until
>Quick Copy
appears. The name
entered in the printer driver (
Harold
, in this example) also appears.
3
Press [OK] . A blinking question mark (
?
) appears before the user
name.
4
Press
U
or
V
to display the desired user name,
Arlen
, in this
example.
5
Press [OK] . The job name entered in the printer driver (
Report
, in
this example) appear with a blinking question mark (
?
) before the
letters.
6
Press
U
or
V
to scroll to the desired job title.
7
Press [OK] . The number of copies to be printed can be set. To
increase the copy count, press
U
; to decrease the copy count, press
V
.
8
Press [OK] to finalize the copy count. The printer prints the specified
number of copies for the job.
Deleting a Quick Copy Job
1
Follow steps 1 through 6 in the above section to let the title of the job
to be deleted displayed.
2
When the title of the job to be deleted is displayed, e.g.
Report
,
press [OK] . The cursor (_) below the copy count starts to blink.
3
Press
V
repeatedly until
Delete
appears below the title.
4
Press
[OK]
. The message
Processing
appears and the stored
quick copy job is deleted.
Using Proof-and-Hold
When you print multiple copies, this mode first prints one copy so that
you can proof it before continuing to print the remaining copies. Since
you can proof the printouts before printing the remaining copies,
wastage of paper can be reduced.
The printer prints one copy and, at the same time, saves the print job on
the hard disk/RAM disk. You can also change the number of copies
when resuming printing from the operation panel.
When the printer is turned off, all stored jobs will be deleted.
>Quick Copy
?Harold
>Quick Copy
?Arlen
>Arlen
?Report
>Report
Copies 001
>Report
Copies 001
>Report
Delete
Note
Refer to the
KX Printer Driver User Guide
for the driver
settings.