Triumph Adler DC 2215, Инструкция по эксплуатации

Страница: 35 / 52

CHAPTER 6 COPIER DEFAULT SETTING
Default code
F27
F28
F29
F30
F31
Setting item
Paper feed shifting adjustment
(lower drawer)
Paper feed shifting adjustment
(multi-bypass)
Inch/metric specifications setting
Folio length setting (drawer)
Folio length setting (bypass)
Setting code
-3.0 to 3.0 (0*) in increments
of 0.1
-3.0 to 3.0 (0*) in increments
of 0.1
1: Inch
2: Metric
3: Metric (Japan)
1: 210 mm*
2: 216 mm
200 to 216 mm (210 mm*)
Setting contents
Adjusts displacement of the copy image.
* This setting item will not be displayed if the optional
drawer is not installed.
Adjusts displacement of the copy image.
* Be sure to use 8 1/2" x 11" (letter)/A4 paper.
Switches the copier specifications setting between inch
and metric.
* Since the specifications setting is made at the factory,
it is not necessary to make this setting under normal
circumstances.
* If "A" and "011" alternate on the copy quantity display,
the copier initializes the data to remedy an error. If this
occurs, make the specifications setting.
When folio is selected as the paper size, this sets the
length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
When folio is used, this sets the length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
6-6